Elektromag... Optimum performance with  Ionger life

Ever since the company's formation  in 1958, Elektromag has championed  the task of transporting iron and steel using magnetic  power. Based on our past experience  of 50 years, our latest lifting magnets are developed. Our circular lifting magnets transport  steel blocks, pigs, and scrap in scrap yards and ports and transport  and process all forms  of scrap in steelworks   and foundries.  They  also  crush clinker in skull cracker ball operations.

What distinguishes  Elektromag's  products from the  rest are their quality  materials, quality of workmanship and extremely long life. Thousands  of Elektromag's  Circular  Lifting Magnets have been in use for  many years throughout the world. We can  provide you with specialdesigns and complete solutions.  We  provide  more details  of our products  and their capabilities in the data overleaf. Take advantage  of our expertise.

Elektromag's  Circular  Lifting Magnets:     All our circular lifting magnets are constructed      in exactly the same way:  in a cast housing, a coilfirmly connected to the  housing by means of a heatconductorwhich  lies around the  central pole. A hard manganese steel bumping plate seals away the magnet's interior. High-performance chains provide maximum safety  when  carrying the magnet  under load. The cable connection is also efficiently  protected.

MODEL LMR. L:    

The standard duty LMR - L model typically  transfers  scrap and light scrap with densities of 0.6 to 1 T/M' using mobile cranes. Standard models  are available in diameters: 500 to 3200 mm.

Elektromag  Circular Lifting Magnets  - the difference  is the quality 

Many Circular  lifting magnets tend to resemble one another:

Elektromag magnets outperform the  rest in many respects:

The cast housing: This  is made from quality cast steel, combining  extreme  ruggedness with high conductivity.

The  Bumping plate: A strong  plate cast from hard, wear- resistant,  manganese steel protects the coil but does not  interfere with  the  magnetic field.

The coil: This is made from Anodised  strip or aluminium  /copper conductor. The anodised aluminium strip requires no insulation  between turns  and  has a much better fill factor than copper coils, which  increases the load possibilities. The coil is also extremely temperature-resistant.

The heat conduction medium: This  insulates the coil from the casing both electrically  and  mechanically, conducting  any heat away outside.  lt must also withstand  critical temperature  spikes without  damage.  Circular  lifting  magnets can have operating  temperatures     of over 200"C in the coil. They  must also be able to withstand  high pressure during  heating.  To meet these requirements  we use the latest heat conduction materials, specially  manufactured to our  instructions.

The design: The magnetic  pole, the steel cross-section  and  the flow through the coil have all been precisely  tailored to  each other to provide  optimum transport  power  and weight conditions.

Accessories

We provide the required power supply for each  of our magnets,  designed  to suit the magnet  and your own mains supply. Sets of backup  batteries  & battery charger  to  protect against  powerfailures that could cause the  load to fall. (optional)
 We also provide Spring / Sprocket driven cable reeling drums. (optional)

YOU  BENEFIT FROM:

The longest operational life: Elektromag lifting magnets have  been  in use for decades.

Optimum performance  and weight conditions:  Your existing  crane can operate to its maximum capacity, with every load optimised.

Special designs for every application: All our magnets are weatherproof and designed foropen-air use. Magnets can be designed for extreme operating conditions:  for instance, Elektromag can supply  specially  insulated  magnets for  use in transporting    hot material.  Based on our experience  of installing thousands  of Elektromag Circular  Lifting Magnets, we can determine  and build the precise type of product suitable for your  task.

Based on our vast experience we can ensure the best results in every type of application  and can produce special designs to suit your requirements.

Complete solutions:  We examine your  requirements and your operating conditions  and then produce a complete solution  precisely  tailored to your needs with all the components  optimally  adapted to each other, from the power supply to the  magnet itself.

Our experience: We have a lot of practical  experience. From processing scrap, right through  to skull cracker  ball operations,  we have supplied equipment  for every conceivable  requirement.

The LMR - H models typically transfer scrap and light scrap with densities of 0.6 to 1 T/M' using cranes. These standard models are available in diameters:  700 to 2100 mm.

Elektromag Circular Lifting Magnets - the difference is the quality

Many Circular lifting magnets tend to resemble one another:

Elektromag magnets outperform the rest in many respects: 

The cast housing: This is made from quality cast steel, combining extreme ruggedness with high conductivity.        

The Bumping plate: A strong plate cast from hard, wear resistant, manganese steel protects the coil but does not interfere with the magnetic field.

The coil: This is made from Anodised strip or aluminium/ copper conductor. The anodised aluminium strip requires no insulation between turns and has a much better fill factor than copper coils, which increases the load possibilities.  The coil is also extremely temperature-resistant.

The heat conduction medium: This insulates the coil from the casing both electrically and mechanically, conducting any heat away outside. It must also withstand critical temperature spikes without damage.  Circular lifting magnets can have operating temperatures of over 200'C in the coil. They must also be able to withstand high pressure during heating. To meet these requirements we use the latest heat conduction   materials, specially manufactured to our instructions.

The design: The magnetic pole, the steel cross-section and the flow through the coil have all been precisely tailored to each other to provide optimum transport power and weight conditions.

 Accessories

 A) We provide the required power supply for each of our magnets, designed to suit the magnet and your own mains supply. Sets of backup batteries & battery charger to protect against power failures that could cause the load to fall.(optional)

 B) We also provide Spring/Sprocket driven cable reeling drums.(optional)

YOU BENEFIT FROM:

The longest operational life: Elektromag lifting magnets have been in use for decades.

Optimum performance and weight conditions:  Your existing crane can operate to its maximum capacity, with every load optimised.

Special designs for every application: All our magnets are weatherproof    and designed for open-air use. Magnets can be designed for extreme operating conditions:  for instance Elektromag can supply specially insulated magnets for use in transporting hot material.  Based on our experience of installing thousands of Elektromag Circular Lifting Magnets, we can determine and build the precise type of product suitable for your task.

Based on our vast experience we can ensure the best results in every type of application and can produce special designs to suit your requirements.

Complete solutions:  We examine your  requirements and your operating conditions  and then produce a complete solution  precisely  tailored to your needs with all the  components  optimally  adapted to each other, from the power  supply  to the  magnet itself.

Our experience: We have a lot of practical experience. From processing scrap, right through to skull cracker ball operations, we have supplied equipment for every conceivable requirement. 

The heavy duty LMR - X and extra heavy duty LMR – XS models are used for particularly  heavy loads when the requisite heavy duty cranes are available.  They transfer compressed scrap with typical  densities  in excess of 1 T/M3. Although  the diameters are the same  as for the standard range, they are designed for  higher performance.  They are therefore  heavier and require  heavy duty cranes. The XS models are distinguished from the X models by their taller coil,  producing an even higher  magnetic output.

Elektromag Circular  Lifting Magnets  - the difference  is the quality

Many Circular  lifting magnets tend to resemble one another:

Elektromag magnets outperform the  rest in many respects:

The cast housing: This  is made from quality cast steel, combining extreme  ruggedness with high conductivity.

The Bumping plate: A strong  plate cast from hard, wear-resistant,  manganese steel protects the coil but does not interfere with the  magnetic field.

The coil: This is made from Anodised  strip or aluminium/copper conductor. The anodised  aluminium  strip  requires  no insulation  between turns and  has a much better fill factor than copper coils, which  increases the load possibilities.  The coil is also extremely temperature-resistant.

The heat conduction medium: This  insulates the coil from the casing both electrically and mechanically, conducting any heat away outside.  lt must also withstand  critical temperature spikes without  damage.  Circular  lifting  magnets can have operating  temperatures    of over 200'C in the coil. They  must also be able to withstand  high pressure during  heating.  To meet these requirements  we use the latest heat conduction materials, specially  manufactured to our  instructions.

The design: The magnetic  pole, the steel cross-section  and the flow through the coil have all been precisely  tailored to each other to provide  optimum transport  power  and weight conditions.

Accessories

We  provide the required power supply for each of our  magnets, designed to suit the magnet and your own mains supply.  Sets of backup batteries & battery charger to protect against  power failures that  could cause the load to fall. (optional)
We also provide  Spring / Sprocket  driven  cable reeling drums. (optional)

YOU  BENEFIT FROM:

The longest operational life: Elektromag  lifting magnets   have  been  in use for decades.

Optimum performance  and weight conditions:  Your existing  crane can operate  to its maximum capacity, with every load optimised.

Special  designs for every application: All our magnets are weatherproof  and designed for open-air  use.  Magnets can be designed for extreme operating conditions:  for instance, Elektromag can supply  specially  insulated  magnets for use in transporting  hot material. Based on our experience of installing thousands  of Elektromag  Circular  Lifting Magnets, we can determine  and build the precise type of product suitable for your task.

Based on our vast experience we can ensure the  best results in every type of application  and can produce special designs to suit your requirements.

Complete solutions:  We examine your  requirements and  your operating conditions  and then produce a complete solution  precisely  tailored to your needs with all the components  optimally  adapted to each other from the power supply to the  magnet itself.

Our experience: We have a lot of practical  experience. From processing scrap,  right through  to skull cracker  ball operations,  we have supplied equipment  for every conceivable.